bootlogo=true
overlay_prefix=sun50i-h616

## 'sun50i-h616-biqu-sd' for CB1, 'sun50i-h616-biqu-emmc' for CB1 eMMC version
fdtfile=sun50i-h616-biqu-sd

## default 'display' for debug, 'serial' for /dev/ttyS0
console=display

## Specify HDMI output resolution (eg. extraargs=video=HDMI-A-1:800x480-24@60)
#extraargs=video=HDMI-A-1:1024x600-24@60

## uncomment for ws2812
#overlays=ws2812

## uncomment for i2c-gpio, pwm3, disable uart0 for pwm3
#overlays=light

overlays=spi-spidev
param_spidev_spi_bus=1
param_spidev_spi_cs=1
param_spidev_max_freq=1000000

## uncomment for TFT35_SPI screen
#overlays=tft35_spi

## uncomment MCP2515 spi to canbus module
#overlays=mcp2515

## Chipselect Lines !
## uncomment overlays=spidev1_2 to release 'spidev1.2' to user space (For example: adxl345), 
## spidev1.0 is used by MCP2515, 
## spidev1.1 is used by tft35_spi. 
## uncomment to release 'spidev0.0' to user space
#overlays=spidev0_0

## uncomment to release 'spidev1.0' to user space
#overlays=spidev1_0

## uncomment to release 'spidev1.1' to user space
#overlays=spidev1_1

## ADXL345
## uncomment to release 'spidev1.2' to user space
#overlays=spidev1_2

## uncomment to set 'PH10' for IR
#overlays=ir

## write the config after the 'overlays' and separate it with a space when multiple functions are enabled
#overlays=disable_uart0 pwm ws2812 light tft35_spi mcp2515 spidev0_0 spidev1_0 spidev1_1 spidev1_2 ir

#------------------------------------------------#
rootdev=UUID=e345f9fc-00c8-4132-8e8e-8afa1304e8ed
rootfstype=ext4