[bed_mesh]
## https://www.klipper3d.org/Config_Reference.html#bed_mesh
## https://docs.vorondesign.com/tuning/secondary_printer_tuning.html
speed                    : 200
horizontal_move_z        : 1
mesh_min                 : 10,33
mesh_max                 : 290,280
probe_count              : 9,9
mesh_pps                 : 3,3
algorithm                : bicubic
bicubic_tension          : 0.2
## relative_reference_index = (x points * y points) - 1) / 2
## Samples : 3x3 mesh = 4, 5x5 mesh = 12, 7x7 mesh = 24, etc
#relative_reference_index : 12
zero_reference_position  : 150, 150