Differences

This shows you the differences between two versions of the page.

--- 3d_druck:voron_2.4:mgn12_umbau [2023/11/24 19:36] – [Links] dominik
+++ 3d_druck:voron_2.4:mgn12_umbau [2023/11/24 19:38] (current) – [Druckteile] dominik
@@ Line 2: / Line 2: @@
 ===== Druckteile =====
+  * https://github.com/VoronDesign/Voron-2/tree/pr_v2.4r2/STLs/Gantry/X_Axis/XY_Joints
+    * xy_joint_left_lower_MGN12.stl
+    * xy_joint_left_upper_MGN12.stl
+    * xy_joint_right_lower_MGN12.stl
+    * xy_joint_right_upper_MGN12.stl
+    * [a]_endstop_pod_D2F_switch.stl
+  * https://github.com/VoronDesign/Voron-2/blob/pr_v2.4r2/STLs/Tools/MGN12_rail_guide_x2.stl
+  * Das X Carriage ist vom Trident (Afterburner Tag)
+    * https://github.com/VoronDesign/Voron-Trident/tree/VTr1_afterburner/STLs/Gantry/X_Axis/X_Carriage
+    * x_carriage_frame_left_MGN12.stl
+    * x_carriage_frame_right_MGN12.stl
 ===== Kopf abschrauben =====
   * Filament aus dem Kopf entfernen