Dr. Klipper Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Voron 2.4 ======

https://github.com/Stephan3/chamber-control-for-klipper

https://github.com/VoronDesign/Voron-2 \\
https://vorondesign.com/voron2.4

===== ToDo =====

  * 11.12.2022 08:25:25 \\ https://www.amazon.de/dp/B08G1GVK7Q \\ Kopf Umbau auf MGN12
  * Cancel Script um den kopf wegzufahren 
  * Pause testen 
  * Skirt Knöpfe für USB / SPI / Bottuns
  * Anleitung Arduino U32
  * Erst Bett heizen, dann Nozzle -> Bett kann sich länger erwärmen

===== Konfig Samples =====
  * https://github.com/garethky/klipper-voron2.4-config/tree/mainline/klipper-config
  * https://github.com/VoronDesign/Voron-2/tree/Voron2.4/firmware/klipper_configurations
  * https://www.itsalllost.com/adventures-in-klipper/

===== Druckteile =====
  * https://www.thingiverse.com/thing:1478147 (2020 Extrusion profile cover (Nut 6))
  * https://www.thingiverse.com/thing:4342648

===== Links =====
  * https://vrparts.de
  * https://fermio.xyz
  * https://vonwange.com

===== Mods =====
  * https://faked.org/voronmods/
  * https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/120decibell/exhaust_housing_side_entry
  * https://www.thingiverse.com/thing:2075219
  * https://github.com/craxoor/VoronMods/tree/master/PCB%20Cover
  * https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/randell/Door_Hinges
  * Nevermore Activated Carbon Filters \\ https://github.com/nevermore3d/Nevermore_Micro

==== Verkleidung ====

  * https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/richardjm/snap-latch-2020
  * Kabelabdeckung 2020 Profil \\ https://www.thingiverse.com/thing:2645563

==== Klicky Probe ====

  * https://github.com/jlas1/Klicky-Probe
  * https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/JosAr/Klicky-Probe
  * https://github.com/protoloft/klipper_z_calibration

==== Bürste ====

  * https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/edwardyeeks/Decontaminator_Purge_Bucket_&_Nozzle_Scrubber
  * https://vrparts.de/en/products/kupfer-reinigungsburste-copper-brush?variant=40162372616360
  * https://meltbro.de/1x-messing-buerste-messingbuerste-metallbuerste-reinigung-des-hotends-3d-drucker.html

===== Teile kaufen =====
  * https://caribou3d.com/en/voron-v24/883-18984-ldo-voron-24-printer-kit.html#/86-extrusioncolor-black/250-voronframesize-300mm/252-raspberry_option-yes