Dr. Klipper Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Zigbee2Mqtt ======

===== Install =====
  * Im Addon Manager die Repo hinzufügen \\ ''https://github.com/zigbee2mqtt/hassio-zigbee2mqtt''
  * Dann normal als Addon hinzufügen 

===== Ser2Tcp =====
Der Dongel hängt am Pi-Display. Deswegen muss der serielle Port per ser2net weitergeleitet werden an HomeAssistant. \\ https://www.zigbee2mqtt.io/advanced/remote-adapter/connect_to_a_remote_adapter.html

  * auf dem PiDisplay ...
    * ''sudo apt-get install ser2net''
    * ''sudo nano /etc/ser2net.yaml''
    * Den zugehörigen Link ermitteln \\ ''ls -lR /dev/ | grep -v '\%%->%%\s../tty' | grep -e 'tty%%[[:%%alpha%%:]]%%' -e serial''
    * Config anpassen -> ''sudo nano /etc/ser2net.yaml'' <code>
define: &banner \r\nser2net port \p device \d [\B] (Debian GNU/Linux)\r\n\r\n

connection: &con01
  accepter: tcp,20108
  connector: serialdev,/dev/serial/by-id/usb-Silicon_Labs_slae.sh_cc2652rb_stick_-_slaesh_s_iot_stuff_00_12_4B_00_21_CC_03_69-if00-port0,115200n81,local,dtr=off,rts=off
  options:
    kickolduser: true
</code>
  * in HomeAssistant