Dr. Klipper Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== YTVI Timer Too Close ======

  * https://klipper.discourse.group/t/timer-too-close/6634
  * https://docs.siboor.com/siboor-trident-june/faq-oct-17/new-cb2-timer-too-close

===== Hardware =====
  * Kopfboard zu heiß ? 

===== TRSYNC_TIMEOUT =====
  * TRSYNC_TIMEOUT = 0.05 > mcu.py
  * https://github.com/rootiest/zippy-klipper_config/blob/master/scripts/mcu_timing.sh
  * https://klipper.discourse.group/t/allow-changing-trsync-timeout-in-printer-cfg-or-permanently-change-it-to-0-05/10467

===== Abhilfe 1 - nice =====
  * https://github.com/Dids/klipper-priority-fix
  * KLIPPY_PROCESS_NAME = "klippy.py"
  * KLIPPY_NICE_VALUE = -20
  * renice -n {KLIPPY_NICE_VALUE} -p {pid} || sudo renice -n {KLIPPY_NICE_VALUE} -p {pid}

===== Abhilfe 2 - chrt =====
  * https://github.com/Dids/klipper-priority-fix
  * chrt --verbose --all-tasks --pid 1 {pid} || sudo chrt --verbose --all-tasks --pid 1 {pid}