Differences

This shows you the differences between two versions of the page.

--- klipper_faq:flash_guide:rp2040:fysetc_r4 [2024/12/11 21:32] – [Konfig] dominik
+++ klipper_faq:flash_guide:rp2040:fysetc_r4 [2024/12/14 08:35] (current) – [YouTube Video #1xx] dominik
@@ Line 6: / Line 6: @@
 ===== YouTube Video #1xx =====
-{{youtube>XXX?half}}
+{{youtube>acdaW_NwV6c?half}}
 \\
@@ Line 127: / Line 127: @@
 ===== Konfig =====
   * ''cd ~/printer_data/config''
-  * ''wget %%"%%https://raw.githubusercontent.com/FYSETC/FYSETC-R4/refs/heads/main/firmware/printer.cfg %%"%% -O printer.cfg''
+  * ''wget https://raw.githubusercontent.com/FYSETC/FYSETC-R4/refs/heads/main/firmware/printer.cfg -O printer.cfg''
   * ''nano ~/printer_data/config/printer.cfg'' \\ <code>[mcu]
 serial: /dev/serial/by-id/usb-Klipper_rp2040_455035712913A168-if00
@@ Line 137: / Line 137: @@
   * Klipper Dienst stoppen \\ ''sudo systemctl stop klipper.service''
   * ''cd ~/klipper && make menuconfig''
-    * Die Einstellungen sind genauso wie im Kapitel [[ebb_sb2209_usb#klipper_flashen|Klipper flashen]]
+    * Die Einstellungen sind genauso wie im Kapitel [[fysetc_r4#klipper_flashen]]
   * ''make flash -j4 FLASH_DEVICE=/dev/ttyACM0''
-    * Wie man an den Port (hier ttyACM0) kommt, ist [[ebb_sb2209_usb#port_ermitteln|hier]] beschrieben
+    * Wie man an den Port (hier ttyACM0) kommt, ist [[fysetc_r4#port_ermitteln|hier]] beschrieben
     * Das Ergebniss sollte so aussehen: \\ <code bash>
 Entering bootloader on /dev/ttyACM0
@@ Line 158: / Line 158: @@
 ===== Links =====
-  * [[https://github.com/bigtreetech/EBB/tree/master/EBB%20SB2209%20CAN%20(RP2040)]]
+  * https://github.com/FYSETC/FYSETC-R4/tree/main
-  * Klipper Konfig \\ [[https://github.com/bigtreetech/EBB/blob/master/EBB%20SB2209%20CAN%20(RP2040)/sample-bigtreetech-ebb-sb-rp2040-canbus-v1.0.cfg]]
+  * Klipper Konfig \\ https://github.com/FYSETC/FYSETC-R4/blob/main/firmware/printer.cfg
-  * Schaltplan \\ [[https://github.com/bigtreetech/EBB/blob/master/EBB%20SB2209%20CAN%20(RP2040)/Hardware/BIGTREETECH%20EBB%20SB2209%20CAN(RP2040)%20V1.0-SCH.pdf]]
+  * Schaltplan \\ https://github.com/FYSETC/FYSETC-R4/blob/738f154f87cf2df64abf5613e63ab99ac6cc0dd3/hardware/R4_V1_SCH.pdf