Dr. Klipper Wiki

User Tools

Site Tools

Trace: • Fysetc Catalyst Bullant
klipper_faq:sbcs:fysetc_catalyst_bullant

This is an old revision of the document!

Table of Contents

Fysetc Catalyst Bullant

Übersicht

Catalyst Bullant
Repo https://github.com/FYSETC/Catalyst_Kit_V2.0 https://github.com/FYSETC/FYSETC_Bullant_V1.0
Image https://github.com/FYSETC/Catalyst_Kit_V2.0/blob/449f8a4ea78f707c273e316bcebbfdf13e400e57/software/update_voron0.2_20240108.rar
https://github.com/FYSETC/FYSETC-Voron-0.2-Pro/tree/main/0.2%20R1%20V1.1 		https://github.com/FYSETC/FYSETC_Bullant_V1.0/blob/90d78536b823cc0e31b075f60f8dc90145677ea5/software/Bullant_Armbian_OS_Klipper_Build_in_V1.0.rar
User / Password Default: linaro/linaro, root/root Default: bullant/armbian, root/armbian
Hostname maixsense maixsense
Schaltplan https://github.com/FYSETC/Catalyst_Kit_V2.0/blob/449f8a4ea78f707c273e316bcebbfdf13e400e57/hardware/CATALYST%20V2.0%20SCH.pdf https://github.com/FYSETC/FYSETC_Bullant_V1.0/blob/90d78536b823cc0e31b075f60f8dc90145677ea5/Bullant%20V1.0%20SCH.pdf
Pinout https://github.com/FYSETC/Catalyst_Kit_V2.0/blob/449f8a4ea78f707c273e316bcebbfdf13e400e57/hardware/CATALYST%20V2.0%20PinsOut.png
https://github.com/FYSETC/Catalyst_Kit_V2.0/blob/449f8a4ea78f707c273e316bcebbfdf13e400e57/hardware/CATALYST%20V2.0%20%E4%BD%8D%E5%8F%B7%E5%9B%BE.pdf 		https://github.com/FYSETC/FYSETC_Bullant_V1.0/blob/90d78536b823cc0e31b075f60f8dc90145677ea5/Bullant%20V1.0%20PNOUT.pdf
CPU / RAM CM68 core based on RK3568 Quad Core 2GB Ram
möglicherweise CM4 kompatibel ?? 		Allwinner R329 Dual-Core Cortex-A53 ARM CPU，Sip 256MB DRAM
eMMC Storage 32GB -
Network 1Gb Kein Autonegotiation auf 100mBit 100mBit
USB 2x USB3.0 1x USB2.0
µController STM32F446 RP2040
Treiber TMC2209 TMC2209 + GC6609
RGB vorhanden vorhanden
Fans 3x geregelt bis 24V 1 Fan
Temp 3x Temp 1x Temp
CAN Bus vorhanden -
Sonstiges I2C, SPI, extra 2x UART

Besonderheiten

  • M36 Boards nicht Pinkompatibel (Anschluss)
    • anderes Pinout am Stecker aber gleiche Stecker / Buchse
  • M36 Boards sehen auch identisch aus
  • keine root Partition mit armbian Konfig
  • Image für Catalyst laut Pi Imager defekt weil Bytesumme nicht durch 512 teilbar
  • Catalyst Board geht bei 100MBit Netzwerk nicht Online!!
  • Zugriff auf Bullant per seriellem Port (für Init) → unpraktisch
  • Bullant macht direkt Update nach Erststart → CPU geblockt
  • installiertes octoeverywhere → Remote Access
  • Update CM68
    • plugin the USB3.0 A-A cable into the interface on the upper layer of the blue USB3.0 socket,
    • open the “RKDevTool_Release”,
    • hold the recovery button, click the reset button, when the RKDevTool found device, release the 2 buttons
    • Click the Upgrade Firmware tab, click the Firmware button to select the firmware, and click the Upgrade button to upgrade
    • Wait for the upgrade to complete. Remember not to cut off the power or unplug the data cable during the process, otherwise the upgrade will fail or even damage the CM68.

Linux Lookaround

  • sudo apt update && sudo apt upgrade -y && sudo apt install -y git silversearcher-ag wavemon hexedit sudoku tcpdump iptraf mc htop dcfldd nano usbutils ranger tldr ncdu can-utils multitail fd-find lsof x11vnc terminator minicom cutecom joystick jstest-gtk && mkdir -p ~/.local/share && tldr -u
  • cat /etc/os-version, lsb_release -a
  • uname -a
  • free, htop → Systemauslastung
  • df -h

Doom compilieren (chocolate)

klipper_faq/sbcs/fysetc_catalyst_bullant.1715700791.txt.gz · Last modified: 2024/05/14 17:33 by dominik
Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki